IMCA reports of an injury from fall at container port.
What happened
The UK Health and Safety Executive (HSE) has prosecuted a logistics company after a worker fell over 10 metres and sustained serious injuries. The worker fell through an open hole in the driver’s cab of a straddle carrier, landing on the concrete floor below. The hole had been created by contractors who were replacing a glass floor.
What went wrong
- The worker, who was undertaking routine maintenance work, was unaware of the open hole before falling onto the floor;
- The worker’s employer had failed to ensure there was a safe system of work at its site – there should have been a system in place that ensured the replacement of the glass floor and routine maintenance work could be carried out safely at the same time;
- The company also failed to ensure there was a risk assessment in place;
- The company failed to implement its own policy for the use of permits to work whilst working at height.
Lessons to learn
Before performing a similar task, persons involved should be asking the following questions:
- Are you aware of what is going on around you? Take nothing for granted, particularly when working at height;
- How are you dealing with simultaneous operations?
- How are you dealing with the complexities of ensuring safe operations if multiple contractors are working at the same worksite at the same time?
- Is your risk assessment suitable and sufficient? Some recent Safety Flash incidents highlight cases where risk assessment was not specific enough;
- Are you following your OWN company rules?
Did you subscribe to our daily Newsletter?
It’s Free Click here to Subscribe!
Source: IMCA
