A general cargo vessel had been modified to carry containers on the cargo hatches. Various twist-lock foundations and pad eyes had been welded to the hatch covers to secure containers, says an article published in Safty4Sea.
The incident
While the vessel was in port preparing to offload and load containers, the newly arrived Chief Officer noticed that many of the twist-lock foundations and pad eyes were significantly corroded. He raised his concern with the Master. They jointly inspected them and found them likely to be unsafe due to the excessive corrosion.
The Master called the vessel management company who made arrangements to offload the remaining containers, find a lay berth and make repairs. The vessel spent 2 days at the lay berth and then resumed its schedule without incident.
The incident was written up as a near miss by the Chief Officer who correctly felt that several of the fittings and pad eyes were on the verge of failing and containers could have subsequently been lost or seriously damaged.
The delay cost
The delay cost the vessel management company just under $27,000 in berth fees plus an additional $18,000 to remove and replace 25 heavily corroded twist-lock foundations and 38 heavily corroded pad eyes. During that time, the crew worked to preserve the remaining twist-lock foundations and pad eyes.
Lessons learned
- Mariners should raise safety concerns when they see something that they know or suspect is not safe.
- Twist lock foundations and lashing gear pad eyes should be inspected regularly to ensure they are not damaged or corroded.
- Mariners should be especially vigilant regarding new or non-routine operations such as loading and carrying containers on general cargo vessels.
Did you subscribe to our daily Newsletter?
It’s Free! Click here to Subscribe
Source: Saftey4Sea
